The West That Wasnt - Conflict

Back to Main Page

You have a Hero, and you know what the numbers mean and how the cards function. Now it is time to begin bringing the Crew to life. A good story is never easy. The protagonist finds obstacles at every turn. Overcoming these obstacles forms the basis of both the Hero and the story. Whenever a Hero is at odds with some element of the universe, there is conflict. When that conflict escalates into the physical, the Master breaks the game down into "rounds". This may also be referred to as "action time".

Action Time

When the Master declares action time, the sequence of game play becomes more structured. Each turn is divided into four phases (I-IV). After each phase is a continuous action phase (if necessary).

Surprise

Action often occurs outside the purview of the senses of some characters. When one of more characters may be surprised, the Master will call for a surprise check using Acuity. The difficulty is Standard (5) if the character is expecting danger, Difficult (9) if he's not. If the check fails, that character is unable to act this round. He can act normally in the next round as long as he makes an Easy (3) bravery check.

Miranda leads the way out of the saloon. Her first instinct is always to keep Jonah and Reuben safe, since they are from back east and old, respectively. She is consequently very wary of danger. When a gang of toughs spring from concealment, she will need to make a TN 5 Acuity check to resist surprise, while Reuben and Jonah will need 9.

Initiative

During action time, each character acts in order based on what they wish to do, as well as how fast (and well) they wish to do it. Initiative is discussed here: The West That Wasnt - Initiative and Action Speeds

Resolving Actions

Saying what you want to do is one thing, doing it another. Past Participle is about the latter. There are multiple types of actions that can be performed during action time: skill checks, extended actions, continuous actions, movement and combat actions.

Skill Checks

During action time skill checks work exactly the same as they do during narrative time. Most skill checks are Normal speed actions, though many are Slow. See the Initiative section, referenced above, for more on skill speed.

Extended Actions

Extended actions are complex skill checks that require multiple victories to complete. As with skill checks, above, they work exactly the same in combat as out. Extended actions are Slow speed actions.

Continuous Actions

Continuous actions take place every continuous action phase. They are discussed in the continuous action chapter. Continuous actions are the same in action and narrative time.

Movement

Movement is described under combat actions, below.

Combat Actions

In the abstract, combat is a straight-forward endeavor. Once an attack action is declared (and is ready to be resolved), all you need to do is figure out the Target Number (TN) and draw a card. If the result is equal to or higher than the TN, you've succeeded in some way.

Simple. Section over... Nope.

As a player, it is good practice to figure out as many of the relevant modifiers for the Master as possible. This frees him up to interpret and narrate the results in grisly detail as well as keep all the bad guys and their modifiers straight. Take a couple seconds to consider your action before you draw; once the card is revealed, no further adjustments can be made. Understand the attempt and the consequences!

Combat Resolution

Resolving a combat action involves a few steps.

I. Movement
II. Declare Target
III. Attack Resolution

Movement

A character may move before, during or after making an attack roll (depending on their declared action type and speed). For purposes of attack penalties, a character is considered to be walking if they move up to their speed value, and running if they move greater than the value.

Scale

All distances in PP are measured in paces. 1 Pace = 1 Meter. Why not just use meters? Well, pardner, it just ain't right sayin' meters when talkin' cowboy.

Declare Target

Before attempting any resolution a target must be declared. A character may declare a single target or multiple, depending on the attack, weapons, skills and other factors as available. Once a target is established, the Master will inform the player of all appropriate modifiers. The player should be aware of the TN before a card is drawn.

Declare Attack

Besides the target, the attack must also be declared. This not only defines the appropriate skill, but also helps determine modifiers based on range, defense or other factors as dictated by the situation.

Attack Resolution

To resolve an attack, draw an action card and consult the appropriate sections. Apply results as directed.

Ranged Attacks

A ranged attack is a Dexterity check with modifiers based on the situation. Some factors are range, target size, movement and other distractions. Those potential modifiers are discussed below.

Range

The Target Number required is Standard (5) plus any relevant modifiers. Add one to the TN for each full range increment between the firer and target. See the gear section for any applicable range increments or other vital details regarding weaponry.

Jonah Benton wishes to plug an unsuspecting villain in the back with a shot from his .45 Peacemaker, gunslinger model (short barrel). The range increment for this weapon is 8. The TN to hit the villain up to 8 meters away is 5, up to 16 it is 6, etc.

Point Blank

Point-blank range is used when one character is holding a weapon in contact with another character, using him like a shield, holding him hostage, or shooting over a table where they both sit. In general, the weapon should be close enough to touch the target with arms extended.

Prone Targets

A Hero laying down is much harder to hit with a ranged attack than a hooligan standing up in the middle of a street. When you make a successful attack test against a prone target, check hit location normally. Unless the result has the prone attribute, it's a miss (based on facing). If the firer is within 2 meters of the target, ignore this rule.

Modifiers

This is known as the base TN, other modifiers may also be relevant to your check. The environment of a firefight is a chaotic and unpredictable place. The Master will inform you of any modifiers which are appropriate. Some common modifiers are listed below.

Situation		Modifier
Firer is moving		-1/-4 (walk/run)
Firer is mounted		-2
Firer is wounded		Varies (See Stun section, below)
Size		Varies
Target is moving		-1 per 5 meters relative speed

Move and Fire

If the character is moving, the TN is adjusted by either -1 or -4, depending on the speed. This penalty applies if any part of the current action is movement, including if the character will move after firing. A character who did not take the movement penalty on a shot may not move after the attempt.

Mounted characters are a special case. The modifier listed is used only if it is worse than the movement penalty applied from firer movement. So a stationary or walking mount confers a -2 penalty on shooting, while a galloping mount costs the character a penalty of 4.

Target Size

If the target has a size 3 or less (1/2 human size), add 1 to the TN. If it's two or less, add 2, and so on, to a maximum of -6 (increments at .5, .25 etc). The opposite is also true. A target that is size 12 gives the character a +1 bonus to his result, a target size 18 has a +2 modifier, and so on, up to a maximum of +6.

Target Speed

Of course, it's harder to hit a moving target than one that's standing still. A penalty of one is applied for each 5 meters of relative speed between the firer and target. "Relative" means you need to take into account how fast the target and the shooter are moving in relation to each other.

Miranda is chasing a bandit down Main. She has a Speed of 12, he has a speed of 8. The relative speed is 4, meaning the penalty is 0. If both were running (double speed), the relative speed would be 8, for a penalty of 1.

Reuben is driving his wagon east down Legless Gulch, with Jonah in the back riding shotgun. Jonah spies an ornery vaquero heading west down the mountain trail, leading into the gulch. Jonah knows when the hombre gets into the gulch, he will hightail it and be right behind them in a jiffy, so he wants to take a shot with his shotgun as soon as possible. Reuben is pushing his nags to 18 paces Speed, while the vaquero is going only 8 paces Speed down the rocky trail. Since they are going opposite directions, the relative speed is 26, for a -5.

Throwing Things

The throwing skill works just like shooting for most weapons. The Range Increment for all thrown weapons is +1/(Strength value + 2), so a 2d8 Strength would add +1 to the base TN of Standard (5) for every 5 meters distance. A target at 10 meters is TN 7. The maximum range a character can throw an average size weapon (1-2 pounds) is his Strength trait value x 5 meters.

Aim and Snap Shots

Each ranged weapon has an aim value, expressed as a capital F, N or S followed by a slash and a number (ex: F/-1). The letter is the speed of an aim action for that weapon, and the number is the penalty the weapon takes if used without a preceding aim action. Some weapons have an attribute called Accurate, which is followed by a number in parentheses. If aimed, that number is added to the result before comparing to the TN. A weapon may be aimed up to two consecutive actions for added bonus.

Aim does not persist from shot to shot. Any firing action also nullifies the aim. Anytime a weapon is fired without a preceding aim action at the target it is considered a snap shot.

Advanced Rule: Fields of Fire

Most weapons have a field of fire of 60 degrees (one hex side). What is a field of fire? In PP, each combat action has a speed that helps determine when it happens during a round. The field of fire is the area where a given weapon type can be easily manipulated on target within the time of an action.

It is possible that a character may begin an aim action in one round, and conclude it by firing in another. If the target has moved out of the field of fire during the aim, the shot may still be attempted, but the aim will be lost.

Handguns are a special case. Because they are small, light and maneuverable, handguns have a 120 degree field of fire. When determining if a target has left the field of fire, trace a line between the two hexes with the original target position.

These rules as written work just fine if you do not use hex maps, or even if you do not use a tactical map at all. Because of the wonders of math, if a target moves more than half of the range from the firer in a perpendicular direction from the firer they have exited a 60 degree arc of fire. If they move more than an equal amount of the range, they have exited a 120 degree arc of fire.

Hey, that isn't so bad after all!

Angus Laroq is staring down Miranda at 10 meters, with his Walker Colt pointed directly at her. Miranda is in a precarious position, her trusty Peacemaker having been shot from her hand by one of his worthless goons wielding a rifle right next to him. Angus and the flunky both aimed with their last action, and are now ready to fire. Next round, Miranda goes first due to her renowned reflexes. Her speed is 12, so if she moves 6 meters directly to her left, she will be out of the firing arc for rifle-toting henchman, but still within for Angus and his Walker. If she uses her full movement, 12 meters, she will be outside both firing arcs.

Procedure

Aim actions can be executed like any other action, or as a continuous action (if for some reason the firer decides not to fire and the target remains in the field of fire). If used as a continuous action, aim may be held over multiple rounds. The center of the field is automatically adjusted each declaration phase (in other words, the facing of the firer is adjusted to the center of the target). For each round after the first where an aim is held, add in the Accurate bonus (in parentheses).

If the target attempts to move after an aim action is complete, a Reflex contest may be attempted by the firer as described under held actions. If he wins, he may fire before the target moves. Otherwise, the shooter may instead choose to hold the aim and follow the target. If the target moves out of the field of fire, the firer loses his aim.

NEW EXAMPLE NEEDED.

Optional Rule: Arc edges. In the preceding figure for 120 degrees, the arc edge is colored in for the hexes that lie on the border, even if a portion of the hex is outside of the 120 degrees (such as in the figure, below). In the 60 degree figure, only the actual angle is colored. For an extra level of gritty detail, if a target is only able to move into a hex that is halfway within the arc, it is possible he has made it into the clear. This can be easily resolved by drawing a card and consulting the toggle result in the bottom right.

When should this card be drawn? This all depends on the desires of your group. The two suggested choices are: when the movement occurs or when the shot is attempted. Each one delivers a different tactical flavor. If it is done when the movement resolves, the aiming character will have a choice with their next action, and can break and do something else. If, instead, it is done as the shot is attempted, the TN could be adjusted significantly. It is suggested that if this optional rule is used, no matter the implementation, that checking the toggle is a resolution, and the card should be used for nothing else.

It could even be handled differently between players and NPCs, skilled and unskilled characters, etc. Play the game you want to play!

Tactical Aiming

Aiming on a range or in a pasture is simple, aiming while .45 caliber slugs whiz past your ears is another thing entirely. In PP, aiming is an action that may take all or part of a character turn. To aim during combat, use the following procedures.

1. Determine if the character may lose his aim. A character may lose his aim if: He has been the target of an attack since the aim began, or since their last action.

2. If the character may lose his aim due to being the target of a ranged attack, perform a Standard (5) Bravery check. Add 1 to the TN for each shot after the first that targets the character, and 2 to the TN for each attack that hit the character. If the check succeeds, previous aim is preserved and the character may aim as normal. If the check fails, the action is used but all previous aim is lost and the aim does not resolve.

3. If the character may lose aim due to a melee attack, perform a Difficult (9) Bravery check. Failure indicates loss of aim, as above. If the character was hit by a melee attack of any kind, they may not aim, and any aim they had accumulated was lost.

4. If none of the preceding apply, the character may aim as normal.

In all cases, perform the Bravery check immediately before drawing the card to resolve the action. The player is not allowed to change actions or targets after determine aim status. Resolving the Bravery check is separate from the attack, and requires a new draw.

Aim and Cover

Characters behind cover receive a bonus to performing and maintaining aim. Whenever a character wishes to perform an aim action, add the armor value of the cover to their Bravery result. The character must have been behind cover for their entire turn. If a character moved between two instances of cover during their turn, add the lowest armor value to the result.

Fan Firing

Single action revolvers are capable of an attack called fan firing. When fan firing, the trigger is held down, while the off hand slams, or "fans", the hammer repeatedly, cocking the weapon as it fires. It can be wildly inaccurate, and should only be attempted by skilled practitioners.

When using fan fire, first declare the number of shots to be attempted, and also the targets. For each shot the TN is increased by 1 successively, starting with the first. Each target after the first increases the difficulty an additional 1, successively. Fan-firing is never aimed, even if an aim action was performed before the first shot.

When fan-firing, each shot is resolved separately, so the order and target must be clear before drawing the first card. No changes can be made to the series once the first card is drawn.

Miranda wants to spend her last four rounds on Angus and his two most trusted cronies, cowering near the back door of the hacienda. She declares the first two shots to be on Angus, then one apiece on the other two. Her weapon of choice is a Colt Peacemaker 45, short barrel. The first shot on Angus is -3 (-2 for lack of aim, -1 for fan fire), the second shot is -4 (extra -2 for fan fire). The shot on crony 1 is -6 (an additional -1 for fan fire and -1 for second target) and the last crony is fortunate that her penalty is -8 (-1 for a third target and -1 more for fan fire)...near impossible. She will draw four cards and place them in order, and resolve them one at a time.

If any shot scores bumps, those bumps cannot be used on other shots. Each shot is a separate resolution.

Jonah fancies himself a card sharp, and usually he comes home a few dollars richer, while also buying himself a drink or two. This evening, however, he finds himself on the wrong end of two jilted Perkins brothers holding Bowie knives. He has drawn his Peacemaker, but given their close range (3 paces) and shared hatred of him, he knows his only chance is to take them both out at once. Jonah decides to attempt a fan fire, where his skill is 3 and his Dexterity d10. He draws a card...

The standard TN is 5, but he is attempting to fan fire 2 shots, making the new total 8 and 9 (due to lack of aim), plus one additional on the second brother for a total of 10. His results on the first card are 10, 1, 11. Success! The first brother is hit. Now for the second.

Not so lucky here, his results top out at 8. Looks like that second brother will have a stab at him with that Bowie knife, after all.

Advanced Rule: Pushing the Limit

Revolvers are not designed for fan-firing. When using this advanced rule, increase the Rel of any revolver when fan-firing.

Two Weapons

A Hero using weapons in each hand suffers -2 to each attack. Any action taken with an off hand is made at an additional -4 (for a total of -6). A hero can fire with each hand up to the weapons’ usual rate of fire. Each shot is a separate check.

Two handed ranged weapons

Generally speaking, you need two hands to operate a rifle, but it can be done with one. Apply a penalty of 2 to any two-handed ranged weapon being used with one hand. For larger weapons, be sure to consult the weight of the weapon and the Strength of the user. It is even possible to use two rifles at once, but don’t forget about the penalties mentioned above.

Melee Combat

Sometimes, a fight just has to be up close and personal. When a character needs to reach out and touch someone, melee combat is in order. Melee combat is generally a Dexterity based skill check with modifiers described below.

Determining Defense

In melee combat, the TN is determined primarily by opponent skill rather than range. This value is called Defense. The standard TN is 3, adjusted by Fighting skill. Add 1 to Defense for every two levels in skill after the first, rounded down. If using a weapon rather than bare hands, the appropriate weapon skill can be substituted.

Reuben has Fighting: Clubs 3. When armed with a shovel, being used as a club, his Defense in hand to hand combat is 5.

Other factors also may affect Defense. Armed combatants (excluding fist-loads) add +1 to their Defense against unarmed characters. Weapons with a Defend attribute add one to their Defense. If both combatants have weapons with the Defend attribute, the combatant with the higher DV weapon adds one to his DV, the other combatant does not add. This does not stack with the bonus for fighting an unarmed assailant.

Advanced Rule: Weapon Length and Defend

Will come later

Active Defense

If this is a thing, it goes here

Entanglement

Instead of doing brawling damage some weapons can be used to entangle and/or trip a target. Doing either is an opposed contest of the attacker's appropriate fighting skill versus the opponent's Dexterity. If the attacker wins, the opponent is successfully entangled, otherwise, the attempt fails.

A character can break an entanglement by exceeding the TN listed on the weapon table with a Strength check. If the weapon is listed as fragile, it would be broken by this (such as with a lariat or simple net). Otherwise, he has to just plain wriggle his way out of it. This is an opposed Dexterity task versus the attacker's skill with the weapon.

The Master may apply bonuses and penalties according to the situation. Obviously, if an entangled character is being dragged behind a horse, it's going to be a bit tougher to break free than it might normally be.

Special Maneuvers

Heroes use all kinds of techniques to ensure success where others fail. What follows are some of the little advantages that Heroes may use to gain an advantage.

Called Shots

When your pistol has one shot remaining, you need to be sure and make it count. Hitting a specific spot on your target is a "called shot”. Called shots adjust the TN, with smaller targets causing larger adjustments. The table below is for targeting people, ask the Master if you need to extrapolate something on a horse, or hit a spittoon or the like.

Size Penalty
torso -2
Legs, arms -4
Heads, hands, feet -6
Eyeball, heart -10

Dodge

Dodge is a derived attribute that all characters possess to some degree or another. It expresses the character’s ability to move quickly when needed, perceive threats, and thereby attempt to avoid them. In terms of game mechanics, the dodge attribute—when a player chooses to have their character perform a dodge action—makes the character more difficult to hit by increasing the TN required for an attacker to land a shot, be it a hand-to-hand, melee or ranged attack*

If a player wishes to have their character dodge, they will declare that the character is dodging during the phase when the character’s action comes up. Dodging is a fast action, and is considered a combat action; since a character is only allowed one combat action in a round, dodge cannot be used in conjunction with any other offensive maneuvers such as shooting or close-combat attacks. If the character is dodging, they are focusing entirely on trying to spot incoming threats, and moving to avoid them.

If the character is performing no action other than dodging, they receive a +2 bonus to the reflex check that round to determine in which phase they act. This way, a character that is solely dodging is more likely to act earlier in the round, and those that act later who might attack them will suffer the TN penalty to do so. If a character combines other, non-combat actions with their dodge, such as movement, the character loses the +2 bonus.

When the character’s action comes up, the player declares that their character is dodging, just as they would declare any other action, such as using a skill or an attack. Once their character is dodging, any attacks made upon them increases the TN by a number equal to the target’s dodge attribute.

Dodging is a sort of continuous action; it is a state that the character remains in for the duration of the combat round and into the next, until their next action. If a character begins dodging in phase I of the first round of combat, but does not act until phase IV of round two, then all attacks targeting them after their action in phase I and from phases II, III and IV of round one, in addition to those of phases I, II, III and IV of round 2 (except those in round 2 with a lower reflex score, which would trigger after the character) suffer the penalty to the TN to hit. In short, once a character begins dodging, they are considered to be dodging until their next action, which will span from one round into the next, unless the dodging character fails a stun save or is otherwise incapacitated. During the next round, they may continue to dodge, or they may take a combat action. If the character stops dodging—for example, to make an attack on another combatant—then any attacks that trigger later do not suffer the TN penalty to hit. Thus, a combatant may opt to hold their action to attack a target that is dodging in hopes that they hold still (stop dodging) long enough to take a clean shot!

A character that is dodging is still subject to the effects of weapons with the Scatter attribute, such as shotguns, and are still count as eligible targets for the purpose of stray shots.

• Ranged attacks that are area-of-effect in nature such as grenades are not affected by dodge; the attack roll in these cases determine if the attacker places the attack on the target, which is often the ground.

Applying Results

A successful hit result indicates that the intended attack has met the target. Determining the effect this has on him is what follows. Action cards provide all of the necessary detail, and work the same in both hand to hand and ranged combat.

Burst Results

The burst results section of the card is currently only used for fan firing, and is discussed in that section.

Hit Location

Each action card has a hit location section located beneath the burst results, to the left of effect grid. The location stack has four entries, with the second from the bottom being in bold and italic font. This is the standard hit location. Hit location may be changed within the stack via bumps (see below).

The hit location stack is arranged in order, top to bottom. This means, generally, locations at the bottom of the stack are below those at the top. Results closer to the Cause section are referred to as "up" when compared to the standard location, while those closer to the penetration results are considered "down".

Vitals are any of the target's vital parts, such as heart, lungs, throat, etc. Vitals, chest and belly are torso for purposes of wounds and wound modifiers. They are treated separately by the hit locaion chart for cover determination and narrative flavor, as well as the bonus for vitals.

Hit Location Modifiers

+1 bump "UP" When punching or using attacks with the punch attribute
+1 bump "UP" with height advantage when fighting
+1 bump "UP" Point-blank range when firing a weapon
+1 bump "DOWN" when kicking or using an attack with the kick attribute

These bump modifiers are applied if the given situation is present, and are not optional. At the discretion of the master, they may be modified or ignored, such as in the case of a character at point-blank who indicates he is pointing at the legs (change the bump to down, instead of up).

Hit Location and Cover

Past Participle does not assess to hit penalties to targets within cover. As long as any part of the target can be seen, or reasonably discerned (targets that are not visible behind cover can be attacked at -4), an attack may be attempted. After determining hit location, the effect of cover can be determined. If the intervening cover is between the target and the attacker, the cover will be hit instead. The Master should clarify which locations are covered, if applicable, before the card is drawn.

If the cover is hit, proceed to the penetration rules to determine if the attack penetrates, and, if so, whether or not the target is affected.

Hit Location and Damage

Some hit locations have special damage rules. Any hit to the head provides 2 damage bumps. Any hit to vitals provides 1.

Anytime a location takes a 5th wound it is disabled. For a limb, such as arm or leg, the location is either severed or otherwise rendered useless. In most cases this is permanent. If the location is the torso (chest plus belly and vitals) or head, disabling results in death.

Cover Penetration

When a target is behind cover, the cover has an opportunity to deflect the attack before damage is applied. The table below lists some common obstacles and their Armor Values (AV). To determine if an attack penetrates armor, add the penetration result from the action card to the Pen of the weapon, then compare the result (called PV) to the AV of the cover.

Armor Value		Obstacle
2		Thin wood
3		hardwood
4		Bricks, iron plating

There are three possible results: P, A, and D. The P (penetrate) result occurs when the PV is 2 or more greater than the AV. In this case, deal the DMG amount listed for the attack to the target. An A (ablate) result is indicated when the PV is equal to or one greater than the AV. In this case, deal the RD to the target. Finally, if the PV is less than the AV, the attack deflects (D).

Dealing Damage

Every weapon in Past Participle has a listing for "DMG" as well as "RD". These will be listed like (2)6, which refers to the appropriate spot in the effects section of the action card. Firearms have fixed damage, such as (3)6 (for a .45 Peacemaker, for example). For every full multiple of the target's Size, the attack causes one wound. Any remainder is dealt in CT. Most humans have a Size of 6, but animals vary considerably. The target takes the wound(s) in the area shown in the Hit Location section of the Action Card.

Why Not 3d6?

In most games, number and type of dice are listed using a standard convention, such as 3d6, where three dice with six sides each are referenced. Since PP uses action cards instead of dice, the convention is modified slightly to clarify exactly where on the card should be referenced. Both "6" columns on the card act like six sided dice (see Future Imperfect: Appendix - 1, Action Cards for more on dice and columns), but in the cause section each cell is a single die, while in the effect section, the cells are the sum of the given number of dice. This means that cause section references are multiple cells, while effect section references are a single cell only.

To avoid confusion, the tables are labeled differently, and referenced by these labels.

If you see 3d6, this is always a cause table reference, if you see (3)6, this is always effect.

Damage Bumps

Some situations provide conditional "damage only" bumps. These add directly to the effect row before any other effects are applied.

Brawling

Certain kinds of attacks, like fighting: brawling, are generally considered non-lethal. Non-lethal combat can still be dangerous. For each multiple of the target size, deal 3 CT. For each double of the target size, deal 1 wound. Truncate all fractions.

Any weapon using the impact attribute is considered non-lethal, however it deals damage differently. Deal wounds as listed above, but also deal one point of CT per point of effect.

Melee and Hand to hand damage

When a hand to hand weapon hits, consult the weapon table for the damage the weapon does. Weapon attributes will also detail how character Strength adjusts the damage dealt by the weapon.

Ancillary Effects

There are three types of ancillary effects: scatter, equipment failure and unintended targets. They are always applied last, after any other indicated effects.

Scatter

Not to be confused with the Scatter weapon attribute, the scatter ancillary effect is invoked when a thrown item is not accurately placed (it "misses"). It may miss the target, but it has to go somewhere. In the case of explosives this could be very important, indeed. Consult the clock face in the upper right of the Action Card, placing the target in the middle and the 6 directly back toward the shooter/thrower. The number in the clock face is the relative direction the projectile lands.

Subtract the result from the TN and add that to the step and scatter the projectile this many meters. The Master should use judgment (and creativity!) in scattering when large distances are indicated. The projectile may not scatter further than half the distance of the initial throw. If a thrower critically fails, scatter the projectile from the thrower instead.

Equipment Failure

Every piece of equipment has a reliability value (Rel) notated in the description. This number is from 1-13, with lower numbers representing more reliable equipment. Any time a piece of equipment is being used it could potentially fail. If the failure result is lower than the Rel, the equipment fails. If no number is present, failure is not possible.

In the case of equipment with a Rel of 1, special rules need to be observed. The most reliable types of equipment fails significantly less than 2% of the time. To simulate this, if an item with a Rel value of 1 is being used, and the 1 result is present on the card being resolved, check the discard pile. If the "2" failure result is in the discard pile, the equipment fails. Otherwise, the equipment performs normally.

Unintended Targets

Sometimes it is necessary to determine if a missed shot could hit someone or something near or along the trajectory of the shot. Potential unintended targets are within one pace of the path of the projectile.

Any projectiles that miss are called stray shots. Compare the number of stray shots to the numbers in the figure icons in the unintended targets section of the action card. If the number is equal to or less than the number of stray shots, then an unintended target is hit.

Declaring Unintended Targets

Unlike other action card results, unintended targets can be determined after the card flip. The Master should choose the most likely target. Generally, only important items or living creatures should be considered targets for this purpose.

If multiple important, living targets exist, the Master should inform the player of the order before the card flip.

Scatter and Unintended Targets

Any weapon with the scatter attribute treats unintended targets differently. These weapons increase the number of stray shots depending on range. Apply this adjustment before determining if any extraneous targets are hit, and before any other adjustment.

Unintended Targets and Melee

When firing in to melee combat, or any scrum where the target is in physical contact (or within an inch or two) with other characters, double the stray shots before determining hits.

Reuben is mad, fightin' mad. Angus Laroq has killed both the nags he uses to pull his wagon, and the darn thing is so full of gold bricks there is no way it will move without them. Reuben has his trusty shotgun, but only a single barrel is loaded, and he is plum out of shells. Not normally the calculating type, he horrifies everyone and aims right at Angus...who is rolling about on the ground with Jonah.

The shotgun has the scatter attribute, so the stray shots are minimum of 1. Jonah and Angus are in physical contact, so that number is doubled, meaning that if he successfully shoots Angus, both target results 1 and 2 will result in Jonah being hit. If he misses Angus, Jonah will be hit on target results 1-4!

Applying Wounds and Concussion

Each hit location is considered separately for would application. Each location can take up to 5 wound points. Arms and legs are destroyed/severed at 5 wound points and no longer functional. Without divine intervention, this is permanent.

Wound Level	Description
1	Scratched
2	Light
3	Heavy
4	Serious
5	Critical

Descriptions of the actual wounds are left up to the Master, with player input, of course.

Critical wounds are the worst case scenario. If a character's wounds are critical in torso or head, he's critically injured. This generally means dead, barring the miraculous.

Wound Markers

Damage can be taken in six locations: head, torso, right arm, left arm, right leg and left leg. The character wound level is the highest wound inflicted, regardless of location.

Wounds are only added together when they're taken in the same location. For instance, a character who takes a light wound to the right arm in one round and another light wound in the same arm later would then have a serious wound in that arm. If a character takes a light wound to the head and then takes a heavy wound to his leg, his wound level is heavy.

Characters never die from arm or leg wounds (assume a ruptured femoral artery is covered under vitals). Further wounds in critically injured limbs cause no more wounds, but continue to cause CT.

Figuring Wound Level

There is no need to keep track of every wound a character takes to determine penalties. Only the highest value wound determines what penalties the character suffers. Therefore, if a new wound is inflicted, and it is not higher than what is already inflicted, the wound level is not adjusted. The character still must make a shock test for the new wound!

Wound Modifiers

Wounds are a terrible burden. Shock distorts senses, pain distracts concentration, and damage to arms and legs make holding things and movement of any type nearly unbearable. All of this is manifested with die roll penalties based on the highest wound the Hero has been inflicted. Consult the table below for details regarding the magnitude of these penalties. Wound penalties are never subtracted from "effect" totals from tools (like weapons), but they do apply to everything else (including other kinds of effect generated by the character, such as social directives or punching damage).

Wound	Modifier	Stun
Flesh Wound	-1	3
Light	-2	5
Heavy	-3	7
Serious	-4	9
Critical (limbs)	-5	11

The penalty depends on the highest-level wound your hero has suffered. If he has a light and a serious wound, for instance, subtract the penalty for serious wounds (-3) from all action totals, irrespective of wound location.

Shock might be more than a lingering distraction, it might conspire to cause a Hero to miss an action or two. Whenever a character is dealt damage he must make a Fortitude check, called a Stun check. Wound penalties apply. The TN is listed in the Stun column of the wound penalty table.

Failure causes a character to be stunned until he makes a recovery check. Each round, stunned characters use their action (Recover, a Slow action) to make recovery check to shake off the stun. Any character that is not stunned must attempt a stun check every time a wound is dealt. Success, of course, means the character is not affected by Stun. Any character that critically fails a recovery check immediately falls unconscious for 1d6 hours or until someone makes a Fair (5) medicine roll to revive.

Taking Concussion

When a character is reduced to 0 CT or lower he becomes “Concussed”. This doesn’t necessarily mean he’s passed out, but he is otherwise unable to participate in the combat. Concussed characters take no actions (at Master discretion, of course). Heroes who continue to take CT after they reach zero risk death.